Spacek Labs Model FS-90-100-12 frequency synthesizer produces +12 dBm minimum output power from 90 to 100 GHz in WR-10 waveguide. This frequency source uses a low frequency synthesizer (Fop: 22.5 to 2...
Spacek Labs model Fc2-625-9 is a broadband band pass filter in WR-15 waveguide. This series of filters operate from 18 to 110 GHz in the standard or custom waveguide bands and have bandwidths from 30 ...
Spacek Labs Model DS-940HD is a cost-effective, Doppler measuring system. The center frequency of the model shown is 94 GHz with +/- 50 MHz of bias tuning. The output power of the DS-940HD is 20 mW at...
Spacek Labs millimeter-wave waveguide detector Model DV-2 is a full-band, 50-75 GHz detector. This fullband detector is a very cost-effective way of measuring power in the V-band spectrum. The RF inpu...
Spacek Labs’ active frequency quadrupler, Model A487-4XW-19, is a frequency multiplier designed for output operation from 44 to 51 GHz. Requiring only 5dBm input power, it is capable of generati...
Spacek Labs model MW-1B-6X is a full-band, biased mixer with a 6X LO frequency multiplier. The RF and multiplied LO ports span from 75 to 110 GHz in WR-10 waveguide. Due to the full W-Band...
Spacek Labs model M80-5X2B is an E-band mixer covering the two radio bands of 71 to 76 GHz and 81 to 86 GHz. The mixer includes an integrated LO doubler, so that the customer need only supply a 39 GHz...
Spacek Labs model MV-1B is a wide-band biased mixer with full V-Band coverage in the RF and LO ports. The RF and LO ports span 50 to 75 GHz in WR-15. The local oscillator power is reduced to only 0 to...
Spacek Labs model T12-W is the E-Band adapter in our series of waveguide to coaxial transitions or adapters. The T12-W covers the entire E-Band spectrum from 60 to 90 GHz with a typical insertion loss...
Spacek Labs model HPF-700 is a waveguide high pass filter in WR-12 waveguide. This filter series is designed with a sharp cut off close to the passband. This filter will pass all of E-Band down to 71 ...
Newsletter